Alto M Series Monitor Manuel du propriétaire télécharger pdf (Page 4)

WHY PLASTIC?

Because we can produce thousands and thousands of piece with the same

characteristics of material integrity. Our Plastic is water and moisture resistance

and it is finished with a "velvet-touch" paint that protects the unit from fingertips

and scratches.

WHY TWO WOOFERS?

Because two is better than one. Joke apart, it is always difficult to get a decent

amount of low frequencies out of a compact speaker cabinet. Low frequencies

are produced by moving air so the more air you move the more low frequencies

you get. Therefore the amount of low frequencies you get out from speaker cabinet

is directly related to moving surface of the woofer. One woofer=limited moving

surface. Two woofers=more moving surface. In fact you get more bass out from

your Alto M Series Monitor than any other cabinet of the same size. But two

woofers also mean two moving coils. Take our M3 as an example. Each woofer

includes a 25 mm (1") moving coil, so with our two woofers we have 50 mm (2")

of moving coil. Such moving coil is usually used in PA cabinet able to handle at

least 200 watt. Therefore, you can put a lot of power into your M Monitor

without producing heat in the moving coils of the woofers with consequent

power compression.

WHY THE TWEETER IN SUCH AN UNUSUAL POSITION?

Positioning the tweeter in the middle of the two woofers allows for a more

coherent sound image. Furthermore, the tweeter is almost out of the baffle and

can give much more breath and depth to the sound. IN conventional Monitors

tweeter are in the middle of a much larger baffle. Try to put your open hands

around your mouth and sing. You hear that "ducky, nasal" sound. Now remove

the hands and sign again. See the hands are the baffles. Compact Monitors

are usually positioned on the top of the mixer or in any case only a few feet from

the Listener. The amazing depth of the M Series with high frequencies is the

effect of the position of the tweeter.

WHY PASSIVE AND ACTIVE VERSION?

Small Studio Owners will prefer the active version. Although, some people will

privilege the set up with a passive Monitor and an external power amplifier. For

example, Alto just introduced a very high-end digital stereo amplifier: the A200.2.

It is a half / rack, 1U little animal that can produce up to 240 watts of power. And

it does not need a fan! Try this amp with one of the M Series Monitor. You will hear

a surprising level of high fidelity and dynamic that it is not possible to achieve in

self-powered models.Passive Monitors are then becoming popular for Dolby 5.1

and up to 8.1 set ups.

2. PHILOSOPHY

SPOTLIGHT

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Alto M Series Monitor Manuel du propriétaire Page 4